昆明惠博电缆桥架厂

怎么样才能使桥架制作更简单

怎么样才能使桥架制作更简单

今天与大家介绍四步走完成桥架弯头制作全过程：
一、首先确认桥架的规格、做什么样的弯头、做什么样的度数的（注意：桥架规格有很多，做的角度不同，它的下料距离也还是不同的）
桥架的规格，长度一般是两米，比如200*100，400*200的，200*100中的200代表的是桥架的宽度，100代表的桥架的边高，
二、计算出下料距离（不能计算错误）
比如规格是400*200做45度的水平弯头，边高是20、宽是40，那就可以根据公式计算出来。
三、画出要切割的线、切割
平时要多动手，可以拿起盒子和纸皮模拟切割，演示水平弯头的切法。
四、合并上螺丝，成品
每一步都是经典、每一步都不能出错。
How can we make the bridge more simple

Today, I'd like to introduce the whole process of four-step bridge elbow production:

1. First, confirm the specification of the bridge frame, the bend made and the degree made.

The length of the bridge frame is usually two meters, for example, 200*100, 400*200, 200 of 200*100 represents the width of the bridge frame, and 100 represents the height of the side of the bridge frame.

2. Calculate the feeding distance (cannot calculate the error)

For example, if the specification is 400*200 and the horizontal bend is 45 degrees, the side height is 20 and the width is 40, then it can be calculated according to the formula.

Draw lines and cut

To do more work, you can pick up the box and paper to simulate cutting, and demonstrate the cutting method of horizontal bend.

4. Combine screws and finished products

Every step is classic and every step can't be wrong.