昆明惠博电缆桥架厂

电缆桥架改进生产消息

     由云南省昆明市电缆桥架厂生产的电缆桥架，可用于电线电缆和管缆多的安装敷设。云南惠博桥架厂为满足各行业的需求，已在逐步使产品做到标准化，系类化和通用化，现在已生产的电缆桥架及配属产品有：支架，母线槽、桥架、托臂、连接板、盖板等。如设计采用可去信联系取样本。
     为了便于在电缆桥架厂批量产生标准的槽型直通桥架，给设计、施工和用户改造创造良好条件，云南惠博桥架厂设计出系列各种规格的直通桥架及与之配套使用的新型电缆引出管接头。新的电缆桥架产品只需要设计人员按型号规格选用于现场的有孔桥架和管接头，不必绘制桥架开孔位置图，也不必认真检查孔径的位置是否与现场电缆引出处保护管位置大小一样，大大减少了电缆桥架施工设计工作负担。
  
    The cable tray produced by cable bridge plant in Kunming, Yunnan province can be used for installation and installation of wires, cables and cables. In order to meet the needs of various industries, Yunnan Bo super bridge plant has gradually made the product standardized, classified and general-purpose. Now the cable bridge and its products have been produced, such as stents, busbar, bridge, bracket, connecting plate, cover plate and so on. If the design can be used to contact the sample.
    In order to facilitate the production of standard trough type straight through bridge in cable bridge plant and create good conditions for design, construction and user transformation, the Yunnan Bo super bridge plant has designed a series of various specifications of straight through bridge and a new type of cable lead pipe joint. The new cable bridge product only needs the design personnel to choose the hole bridge and pipe joint on the site according to the model specifications. It does not have to draw the position map of the bridge open hole, and does not need to check whether the location of the aperture is the same as the location of the protection pipe in the site of the site. It greatly reduces the burden of the construction design of the cable bridge.