昆明惠博电缆桥架厂

云南惠博桥架厂校核桥架强度

    2018粘4月1日，惠博桥架 厂通过对新生产的电缆桥架的强度进行分析，检验电缆桥架是否符合要求。
    基本方法：通过运用ANSYS软件对桥架、螺杆、支架、母线槽、膨胀螺栓杆等进行强度检验。通过一天的核验，结果显示螺杆最大应力ơMax=20.527Mpa,
膨胀螺栓杆所受最大应力为ơMax=43.127Mpa符合要求.

2018 sticky April 1st, by analyzing the strength of the newly produced cable tray, we checked whether the cable bridge meets the requirements.

基本方法：通过运用ANSYS软件对桥架、螺杆、支架、母线槽、膨胀螺栓杆等进行强度检验。通过一天的核验，结果显示螺杆最大应力ơMax=20.527Mpa,

The basic method is strength inspection of bridge frame, screw rod, bracket, busbar slot and expansion bolt rod by using ANSYS software. Through the verification of the day, results show that the maximum stress Max=20.527Mpa screw,

膨胀螺栓杆所受最大应力为ơMax=43.127Mpa符合要求.

Expansion bolt rod stress was Max=43.127Mpa to meet the requirements of it.